木製ウォール Entrance wall made of wood

木で壁を作ることにしました。材料をホームセンターで買ってきました。

このコンクリート面に取り付けたいと思います。

(2020.08.01)

1枚 98円の杉板を買いました。製材で切ったのみものなので、表面はザラザラなので電動サンダーで磨きました。

本当ならカンナを掛けるべきところですが、手動カンナでは疲れるのでサンダーにしました。

(2020.08.02)

下地を作ります。Make the base.

足は高さ調節が出来るように全ネジを利用したものを考えました。

The legs are fully screwed so that the height can be adjusted.

長さ2000ミリの板を縦に張ってゆく準備をしました。

(2020.08.03)

板材を張ります。板は杉板で、9ミリ×90ミリ×2000ミリです。ホームセンターで1枚98円でした。

値段は安かったのですが、無仕上げで未乾燥です。

Attach the planks. The board is a cedar board and measures 9mm x 90mm x 2000mm. It was 98 yen each at the home center. The price was low, but it was unfinished and unseasoned.

張り終わり、照明も板壁に取り付けました。

塗装は、板材が乾燥し終わった頃に塗りたいと思います。6か月位で乾くと思います。この壁を使ってディスプレイをしたいと思います。コンクリート壁はビスが簡単に打てなかったので、これで楽になります。

The price was low, but it was unfinished and unseasoned. I would like to apply the paint once the board has finished drying. I think it will dry in about 6 months. I would like to use this wall for display. It was not easy to drive screws into the concrete wall, so this will make it easier.

(2020.10.18)

壁に棚を付けました。この棚は壁上部に差し込んで取り付けているので、場所を自由に移動できます。

(2020.10.31)

飾りを増やしました。

(2021.2.23)

2月現在こんな感じです。